Vídeo dubbing, To video dub, Video dubbing – RCA CC-285 User Manual

Page 37: Recording features (coni.)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording Features (coni.)

Vídeo Dubbing

The video dubbing feature lets you
record new video (picture) on a
pre\iousIy recorded tape without
erasing the original audio (sound).

When you video dub a tape, the

previous video is erased and replaced

with the new video.

When video dubbing, the source for
the video dub is “whatever you are

seeing in the viewfinder”.

The new video you want to put on the
tape can be added one of two
different ways:

• from whatever you focus the

camcorder on and see in the
viewfinder.

• from video coming in through the

camcorder’s

AV IN

jack (using the

audio/video input cable shown
below).

• Sec pages 44 and 45 for optional

accessories.

Note: You can also dub both the
video and audio simultaneously if
desired. To do so, press

dub

and

PLA Y,

then

video

dub

and

PLAY

in step

at the right. Be sure

to connect both the Audio & Video
Plugs to the VCR, Tape Deck, or
CD Player.

To Video Dub

1. • You can use the camera

section on your camcorder
for creating the new video
to dub. To do so, remove
the connector cable from
the

AV IN

jack on the

bottom of the camcorder, if
connected.

• Or, if desired, connect the

source VCR or other video
generating device to the

w jack of the camcorder.

. Slide the

power

switch to

turn on the camcorder.

3. Slide the

camera

playback

switch to the

playback

position.

4. Insert the tape and press

play

and then

rewind

to locate a

point on the tape a few
seconds before you want to
begin dubbing.

5. Press the

pause

button

exactly where dubbing is to
begin. The camcorder will
enter the Play/Pause mode.

. Press and hold

VIDEO

dub

button. Then press

PLA Y.

Release both buttons.

7. To be^ dubbing, press the

PAUSE

button. The word

v.DUB

will appear in the

viewfinder to let you know
when the camcorder is video
dubbing.

. To end dubbing, press the

STOP

button.

Note: The word

v.DUB

will app>ear

in the viewfinder to let you Imow
when the camcorder is video
dubbing.

White Audio Plug
(No Connection)

Bottom ot Camcorder

or CD Player

Yellow Video Plug

Audlo/VIdeo

Input Cebi«

(aupplled)

A V tN

Jack