RCA RP-9753 - Manual (Page 9)

D fl n n
I
B
Source of Sound
■■ U U ThA cniirrA .«AlATtrir hiittons -— TIJKIFR. TA\
I
BASIC OPERATION INSTUCTIOMS feonUnued)
TUNER TAPE CD AUX/AV
The source selector buttons — TUNER, TAPE, CD, and AUX/AV — indicate
the sources of sound available to you through the system.
• To select a source of sound, simply press the button that represents the
desired source. The system shifts to the selected source.
Adjusting Volume
• Turn the VOLUME dial clockwise to increase volume. Turn it counter­
clockwise to decrease volume.
NOTE: The “mute” function is available through the remote control. Press
the MUTE button to suspend the output of sound. Press MUTE again to
restore volume to the current setting.
BALANCE
Adjusting Balance
• Turn the BALANCE dial clockwise to increase the proportion of sound
delivered to the Right speakers.
• Turn the BALANCE dial counterclockwise to increase the proportion of
sound delivered to the Left speakers.
• Set the dial to the “center” position to deliver the same load of sound to
all speakers.
Selecting Equalizer Settings
• Press the button that provides the set of frequency adjustments that you
find most suitable to ^ur listening material or listening taste.
You can select from JAZZ, POP, ROCK, CLASSICAL, or FLAT (all frequen­
cies given equal emphasis).
CLASSIC FLAT
1
When you select a setting, the display shows the graphic equalizer
adjustments for that setting.
BASS
BOOST
Bass Boost
Use B/\SS BOOST to increase the bass response delivered to all connected
speakers, both front and surround.
• Press the B/^S BOOST button to activate this option (“BASS BOOST”
message appears on the display).
• Press the button again to turn the option off (“BASS BOOST message not
displayed).