beautypg.com

Getting started (continued), Unpacking ybur system, Where to place the system – RCA RP-9753 User Manual

Page 4: Unpacking your system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

GETTING STARTED (continued)

Unpacking Ybur System

Carefully remove all items from the shipping carton. Be sure to remove all
packing materials and wrappings.

We recommend that you save the shipping carton and packing materials in
the event you want to store, transport, or ship the unit in the future.

Your new RCA audio system includes the following items;

• AM loop antenna
• Two front speakers

• Hand-held remote control

• Two 2-meter speaker wires

• 1-meter FM antenna wire

• Tuner/Amplifier unit
• CD/Cassette unit

Where to Place the System

• Choose a convenient location that provides a solid, level surface. Do not

place the unit on a soft surface such as carpeting or foam rubber.

• Select a location away from direct sunlight, radiators, air ducts, and other

sources of heat.

Avoid locations that are subject to moisture, mechanical vibration, shock, or

excessive dust.

• Be sure the location provides adequate air circulation. Good ventilation is

essential to protect the system from internal heat built-up.

NOTE: Locate your system in a spot that allows for best positioning of the
speakers. Optimal sound reproduction occurs when:

• Speakers are placed at least seven feet apart and facing the listener.

• Speakers are placed at least two to three feet out from the wall to prevent

accentuated bass response.

• Also see “Placing Speakers,” page 6, for suggested speaker positions.

IMPORTANT: MOISTURE CONDENSATION

Moisture is often seen on the inside of the windows in a warm room on a

cold winter day. Moisture can also form inside the player in a similar manner

in the following cases;

• Immediately after a heater has been turned on.
• In a steamy or very humid room.
• When the unit is suddenly moved from a cold environment to a warm moist one,

for example, in moving a unit from a cool air conditioned room to an outside
porch on a humid summer day.

If moisture forms inside this piayer, it may not operate properiy. To cor­
rect this probiem, turn off the power and wait about 20 or 30 minutes for

the moisture to evaporate.