Selecting a preset station, Fm stereo reception, Selecting a preset station fm stereo reception – RCA RP-9753 User Manual

Page 12: C d ( . j, Basic operation instructions (continued)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BASIC OPERATION INSTRUCTIONS (continued)

■•W

Selecting a Preset Station

To select a preset station;

• Select the desired tuning mode (AM or FM). Press the BAND button to

switch between the two modes.

• Press PRESET ▲ or PRESET ▼ to reach the number that stores the

desired station.

The display shows the currently selected preset number.

MHz

FLAT

EO PRESETS

™

( C D ( . J

WOHi

330

IKHz

3.3KHt lOKHl

NOTE: If power is interrupted or if the unit is unplugged, tuner presets are re

tained for approximately 7 days. After 7 days, these settings must be

reprogrammed.

FM Stereo Reception

Reception in FM Stereo mode provides the “fuller” sound available in broad
casts that feature an FM stereo signal.

• Press the FM ST/MONO button to set the tuner to FM Stereo mode before

you start tuning for a station. The FM AUTO message appears on the
display.

• While you are tuning, the “STEREO” message lights on the display

whenever you’re receiving a station in clear FM stereo.

• If reception is weak in FM Stereo mode, press the FM ST/MONO button to

turn the FM Stereo option off (“FM AUTO” message not displayed). This
will improve reception by reducing static (but will also cancel the stereo
effect).