Toshiba TEC MA-79 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

El-01397
Journal Winding Reel
Journal Sheet
Receipt Sheet
Fig. 5
4)
Then insert the paper ends into the
Stamp Unit located on the upper side of
the printer, and pull up the paper a little
so
that
the
paper
may
correctly
be
tensed. (Fig. 4)
5)
Wind the paper end of the journal sheet
(the bottom sheet) around the Journal
Winding Reel two or three times, set the
reel to the holder, and press the [FEED]
key for a white to tense the journal paper.
(Fig- 5)
6)
Attach the Receipt Cover with the paper
end of the receipt sheet (the upper sheet)
coming out of the Receipt Outlet located
on the Receipt Cover. (Fig. 6)
For a single-sheeted roll, simply attach
the Receipt Cover. The Receipt Outlet
is used as a Journal V\flndow.
7)
When replacing the roll, first tear off the
paper of the old roll anywhere between
the roll and the paper inlet. Then press
the [FEED] key to remove the remaining
paper piece from the printer, but do not
pull it forcedly by hand.
Fig. 6
-
63
-