Toshiba TEC MA-79 - Manual (Page 48)

El-01397
* : Depressing [RTN MDSE] will reverse the positive/negative status of the
department. When the department is set to be negative, the arrow lamp
“( - )” will be lit on depressing the [DEPT] key. if the lamp remains unlit
when the [DEPT] key is depressed, the department is positive.
** : Depressing [TX/M] will reverse the current tax status of the department.
When the department is taxable, it will reverse the department into non-taxable.
When non-taxable, it will reverse into taxable. You can only verify the
resulting status on the program receipt.
: Enter “0** to obtain Itemized Dept status.
Enter "1” to obtain Single-item Dept status.
2
regardless of the
preprogrammed status.
: Depress the Department Key (of 1 to 4) whose status is now being
programmed.
NOTES: 1) Even when the status of a department is changed, the preset price (if set)
will not be cleared. Neither will the Listing Capacity of the department be
cleared.
2) The procedure of the key-in sequences marked with to may be
3)
changed Interchangeably as long as they are operated before depressing
the [DEPT] key.
No other keys than [RTN MDSE], [TX/M], [0], and [1] can be entered
before the [DEPT] key.
SAMPLE OPERATION To set each department with the following status:
Dept. 1 Positive, Taxable, Itemized
Dept. 2 Positive, Non-taxable, Itemized
Dept. 3 Positive, Taxable, Single-item
Dept. 4 Negative, Non-taxable, Itemized
Mode Lock to “SET”,
Enter 3, depress [@/FOR].
(Under the condition that all the
departments are set to be positive
and non-taxable before this sample
operation)
[TX^] 0 [DEPT 1] (Displays 0.00)
0 [DEPT 2] (Displays 0.00)
[TXfflfl] 1 [DEPT 3] (Displays 0.01)
[RTN MDSE] 0 [DEPT 4] (Displays 0.00, and Arrow
Lamp “ ( - ) ” lights.)
[AT/TL] to end this submode.
-45
-