11 multi-source rec out recording / playback, Note, Nm m – Denon AVR-3600 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8-11 Multi-source REC OUT recording / playback

While listening to or watching the currently playing program source, you can record another program source (REC OUT mode}, or by connecting the

input jacks of an amplifier, etc., located away from the AVR-3600 (for example in another room) to the MULTI SOURCE output jacks, you can output

the program source to the other location (room) (MULTI mode).

■ Recording a source other than the one currently playing (REC OUT mode)

1. Press the REC/MULTI MODE button until "REC OUT SOURCE" ap

pears on the display.

Mooe

Select the source to be output to the recording output terminal.

Press the REC/MULTI SOURCE button repeatedly until the desired

source appears on the display

souptce

DISPLAY

STEREO TUNED^

m§

|№ONOCD TUNERVOPT TV VCR1 1 Vm m№El

The indicator of the selected program source lights on the display

at this time.

Set to the audio or video recording mode.

For operating instructions, refer to the manuals of the components

to be used for audio or video recording.

REC OUT select is not possible for TAPE-2 monitor REC OUT.

The signals of the source expect the digital input selected with the REC OUT mode are also output from the MULTI SOURCE AUDIO/VIDEO OUT

terminals.
Digital input signals cannot be recorded. To record, connect to the analog input terminals.
To cancel the REC OUT mode.

Press the REC/MULTI MODE button or the REC/MULTI SOURCE button repeatedly until "SOURCE" appears on the display.

Playing a source other than the on© currently playing in a different room (MULTI mode)

Press the REC/MULTI MODE button repeatedly until "M-SOURCE

SOURCE" appears on the display.

The "MULTI" indicator lights on the display at this time.

Select the source to be output to the MULTI SOURCE output termi

nal, Press the REC/MULTI SOURCE button repeatedly until the de
sired source appears open the display.

The indicator of the selected program source lights on the display

at this time.

SOURCE

^ When the MULTI button on the remote control unit is pressed, the

source to be output from the MULTI SOURCE terminals can be se
lected.
(This cannot be selected when the main unit is in the REC OUT

mode.)

^ The digital signals are not output from the MULTI SOURCE AU-

DIO/VIDEO OUT terminals.

^ To cancel the MULT! mode

Press the REC/MULTI MODE button or the MULTI button on the re

mote control unit repeatedly until "SOURCE" appears on the dis-
play.

DISPLAY

Auro

C«

STEREO TUNEO

!¡>S0N0CP

tunes

VCñl 2 V.AUX DfrAEE|

NOTE:

The signals of the source selected in the MULT! mode are also output from the TAPE and VCR recording output terminals.