Denon AVR-3600 - Manual (Page 11)

d] SYSTEM SETUP
After connections with other components have been made, make the various settings on the monitor using this unit's on-screen display.
These settings must be made in order to complete the AV system in your listening room.
Make the seven settings described below.
(D
speaker Configuration
(D Delay Time
® Channel Level
@ Digital Input (only when an AV component is connected to the digital input jacks)
(D AC-3
© Auto Tuner Preset
® On Screen Display
NOTES:
® The output from the S MONITOR OUT terminal has priority for the on screen display. If you want to always output the on screen display
signals to the video output do not connect a cable to the S MONITOR OUT terminal,
® The on screen display is not displayed for the MULTI SOURCE MONITOR OUT terminal,
e This model's on screen function is designed for high resolution monitor displays.
Small characters may be difficult to read on small displays or low resolution TVs.
Use the following buttons on the remote control unit to make the settings:
"ENTER" button
Press this to switch the display on the screen.
Also use this button to complete the setting on the screen.
'CURSOR" buttons
@ and ® : Use these to move the cursors {^ and ^) to the left and right on the
screen.
A and V : Use these to move the cursors (A Qtid W) up and down on the screen.
6-1 Before setting up the system
1. Turn on the power and press the ENTER button.
The "Menu" screen (screen 1) appears on the monitor.
2, Use the CURSOR buttons to specify "System Setup'
A
cuRsoa^
3. Press the ENTER button to switch the screen.
The "System Setup Menu" screen (screen 2} appears on the monitor.
Menu
crSystem Setup
Surround Parameters
Tuner Preset Stations
Menu Off
( screen 1 }
System Setup Menu
□"Speaker Configuration
’’'Delay Time
Channel Level
Digital Inputs
AC-3
Auto Tuner Presets
On Screen Display
Setup Menu Off
i screen 2 )
11