Screen 6-a ), Delay time, Gautior – Denon AVR-3600 User Manual
Page 13: Betogate'b, Fu fr, Sybwoofer, Screen 6~b ), 4 setting the channel level, Screen 7 ), Channel level crlevei clear
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Use the CURSOR buttons to input the listening position and the distance of the differ
ent speakers, {screen 6-A)
To select the speakers:
CU^R fv
To select the distance:
CURSOR CURSOR
0^0
^ Select "Default" to return to the initial settings,
5, After the above selections are completed, press the ENTER button again.
The "System Setup Menu" screen reappears.
This procedure automatically sets the optimum surround delay time for the listening
room.
s; If you set an invalid distance, a CAUTION notice, such as screen 6~B will appear. In this
case, please relocate the blinking speaker(s} so that its distance is no larger than the
value shown in highlighted line. Then press the ENTER button again.
^ Set in such a way that the distance to the center speaker is the same as or up to 5 feet
0.5 meters) shorter than the distance to the front left and front right speakers and the
subwoofer.
^ Set in such a way that the distance to the surround left and right speakers is the same
as or up to 15 feet (4.5 meters) shorter than the distance to the front left and front right
speakers and the subwoofer.
FL
FR
Sub
-woofer
Delay Time
-------------
crFL,
FR
T&Siibwooier
^2ft^
Center
12 ft
Q
SL&SR
10 ft
0
Default
V
_______________
( screen 6-A )
Delay Time
GAUTIOr^!
BETOGATE'B
FU FR
&Sybwoofer
{ screen 6~B )
6-4 Setting the channel level
Use test tones to adjust the volume of the different speakers.
1. Use the CURSOR buttons to specify "Channel Level" from the "System Setup Menu"
screen, (screen 7)
A
CURSOR fv
2.
Press the ENTER button.
The "Channel Level" screen (screen 8) appears on the monitor,
3, Use the CURSOR buttons to select "TestTone Mode", then select "Auto" or "Manu
al".
CURSOR CURSOR
© ^0
A
CURSOR Cv
4, Use the CURSOR buttons to select "Test Tone Start", then select "Yes".
CURSOR
CURSORK
vK
System Setup Menu
Speaker Configuration
ADeiay Time
crChannei Level
’^Digital Inputs
AC-3
Auto Tuner Presets
On Screen Display
Setup Menu Off
( screen 7 )
Channel Level
crLevei Clear ,____ ,
Test Tone Mode
^
► I Manual
Test Tone Start
screen 8 )
13