2 clerk locks, 3 receipt on/off switch – Toshiba TEC MA-1400-100 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4.2 CLERK LOCKS
E01-11014
Key-lock Type (Standard)
1.2
3.4
These locks are used to identify which clerk is operating
the register.
Clerk Keys (1, 2, 3, 4)
Each clerk should keep his/her clerk key. The register
will not operate unless one of these keys is inserted and
set to the correct position in the Clerk Locks. Each of
the keys may be inserted and pulled out in the neutral
position marked with the dot.
Push-key Type (Alternative Option)
This type may be installed in place of the standard key
lock type mentioned above, as an alternative option.
Each clerk is assigned his/her own clerk key (1 to 4).
The register will not operate unless one of these keys is
pushed down.
1
2
3
4
4.3 RECEIPT ON/OFF SWITCH
RECEIPT
ON
OFF
This switch has two positions available - ‘OFF’ position and‘ON’position. When
in the ‘OFF’ position, no receipt is issued from the register and sales are printed on
the journal roll only. When the switch is set to the ‘ON’ position, sales are printed
on both receipt roll and journal roll, then a receipt is issued which is automatically
cut off and given to the customer.
- 4 -