JVC DVB TU-HD500A - Manual (Page 27)

UsinglheMENUSyslem
2. Time Setting
From here you can adjust time, timer and time related setting. For using timer related
function, you should setting up the clock.
Clock Setting
From here you can setup the current clock.
If you set the Clock Setting to Ott, the timer related function will disable and
current time information will not display.
If you setup to Auto, this FID-STB will receive clock information from Aerial
signal. The timer related tu net ion will work with Aerial signal clock intormation.
Even if clock is incorrect, it came from broadcaster not this FID STB, For the
complete Auto clock setting, you should watch the TV program and wait couple of
minutes to finish the Auto clock setting.
If you setup to Manual, you should enter the current clock and this FID STB will
setup the internal clock. The timer information will work with internal clock
Information. This FID STB does not support battery back up for AC power failure.
1) Press MENU button to display the menu.
Press LEFT or RIGHT to select TIME SETTING menu
ENTER or RIGHT to select the Time Setting menu.
2) Press ENTER or DOWN to select the Clock Setting menu.
3) Press UP or DOWN to select desired Clock Setting mode.
You can select Off, Auto or Manual,
Eor the Manual clock setting, you should input current time information.
4) Press ENTER or RIGHT to complete setting.
___ О _____
TIME SETTING
Clock Setting Off
Time Zone NSW/ACT
Wake Up Timer Off
Off Timer Off
Sleep Timer Off
ti Off
Auto
Manual
Frali ENTER er F to gntor, Pr*Bi
▲
or ▼ ta mav«,
Praia CXIT ta ailt. Praia ^ to is back.
_____ © ________
TIME SETTING
Clock Settino M:^niiAl
«nOr eurrani llm*.
[>12:00 AM
Off
Auto
Manual
Prai< CNTCR gr R tfl tntgr Pmi er ▼ to r
Pr*» CXIf to gill, Prai* ^ to g« Ьевк^
22