JVC DVB TU-HD500A - Manual (Page 26)

№ng1heMENUSysl€ni
Audio Downmix
For the stereo analog audio output, you can select Lt/Rt or Lo/Ro output mode.
For the analog stereo connection, set the Lt/Rt for correct audio intormation.
For the digital audio connection, set the Lo/Ro for full 5.1 channel support.
1) Press MENU button to display the menu.
Press ENTER or DOWN to select the Audio/Video Setting menu.
2) Press ENTER or RIGFIT to select the Audio Downmix menu.
3) Press UP or DOWN to desired audio downmix mode.
4) Press ENTER or RIGHT to complete audio downmix mode select.
_________________
AUDIO/VIDEO SETTING
TV Display 4:3 PS Lo/Ro
Scrsen H Position Center f Lt/Rt
Screen VPositkjn Center
Audio Preference Dolby D
Stereo Oownmtx Lt/Rt
MPEG Audio Acfj. On
Sub Title Off
PHÉt ENTER «r R tA *111«. Pr«t* A Dr 1
Prais EXIT to *ilt, Pr*at ^ te gs back, la maw*.
MPEG Audio Adj.
If broadcaster simultaneous broadcast MPEG Audio and Dolby Digital Audio,
generally the MPEG Audio Level is louder than Dolby Digital Audio.
When user set MPEG Audio Adj. On then the HD STB will automatic decrease the
MPEG Audio Level and make a similar Audio Level with Dolby Digital.
When user set MPEG Audio Adj. Off then the HD STB will follow by original Audio
Level from broadcaster.
Eor the analog audio connection, set to On for making similaraudio level.
For the digital audio connection, set to Off for making similar audio level.
Sub Title
In the Digital Broadcasting, the broadcaster broadcast Sub Title information with
Audio and Video. You can see the Sub Title information using set up the Sub Title
ON. In generally. Sub Title also called simple teletext or caption.
Also you can set up this function using S.TITLE button on the remote control.
If Sub Title is On, the Sub Title information will display followed by picture.
This HD STB is not generated Sub Title, it is decode Sub Title information from
Aerial signal. If Sub Title is On but do not display the Sub Title, check Aerial signal
or consult your local broadcaster.
21