Uniden UH-057 - Manual (Page 33)

For example, selecting 40 mSec
Press The LCD displays
3. Press the (|3) Key to complete the programming.
Two beeps will be heard and the unit returns to its
previous status prior to accessing Programming Mode.
Lead-In Delay
Lead-In delay is a SELCALL transmit parameter that
"wakes-up” and helps the receiver of the other radio to lock
onto the incoming signal. Everytime you Transmit a
SELCALL ID, Lead-In Delay attaches itself in the beginning
of the code sequence and makes the transmitter to be ON
longer prior to the code transmission. This sets the commu­
nication link between the transmitter and the other receiver
more stable.
One major application of having a longer Lead-In Delay is
when you are Selectively Calling another radio via a
repeater station. Long Lead-In Delay helps to stabilise both
the communication link from your radio to the repeater
station and the communication link from the repeater to the
other radio.
To change the Lead-In Delay of your radio;
1. Press the for about 1.5 seconds. The LCD displays;
L
Page 31 UH-057