Uniden UH-057 - Manual (Page 29)

Programming
SincG UH-057 can support either 5 tone or 6 tone signalling
format, you and your group must decide which format are
you going to use.
Receiver SELCALL ID
To program your own receiver SELCALL ID, do the follow­
ing procedure.
1. Press and hold the Key for about 1.5 seconds.
Two beeps will be heard and the LCD displays:
2. Press the Key. The TSQ indicator appears on the
LCD Display. Flashing,
3. Enter your chosen SELCALL ID using the Numeric
Keypad.
Example: 1 2 3 4 5
Everytime you press the Numeric Keypad confirmation
tones will be heard. The SELCALL Tone assigned to the
pressed Key will be displayed on the LCD as shown:
(please see page 34 for the Numeric Key SELCALL
TONE assignment)
CD
CD
CD
CD
CD
- 5
■ c®'-
■
Page 27 UH-057