Operation, Receive, Direct channel keying – Uniden UH-057 User Manual
Page 17: Auto-squeich
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
RECEIVE
1. Turn the radio ON. Rotate the ON/OFF Volume control
clockwise until you hear the click. A channel number
should appear in the LCD Display.
^
DOWN
^
'
2.
Press the
O or O
switch or use the Numeric Keypad
to select the desired channel.
3. Press the monitor switch (Auto-squelch turns OFF).
4. Rotate the ON/OFF Volume control to adjust the speaker
volume to a comfortable level,
5. Press the Monitor switch (Auto-squelch turns ON),
Direct Channel Keying
Allows you to directly select a channel using the Numeric
Keypad.
Example 1: Selecting CFI5 directly
- Press
then ©> ,
Example 2: Selecting CFI25 directly
-Press CD then
•
Upon pressing the <|D Key, the LCD display and the unit
channel setting changes to CH25.
Auto-Squeich
Automatically eliminates the unwanted "rushing" noise when
the unit is turned ON.
- press the Monitor Switch to set the Auto-squelch
feature ON or OFF
Note:
To listen to weak signal transmissions, switch OFF
the Auto-squelch feature (Squelch is on minimum
level).
Page 15
UH-057