Selcall operation receiver quieting – Uniden UH-057 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SELCALL OPERATION
Receiver Quieting
Puts the receiver on "Quiet" Mode (also known as "Tone
Squelch” Mode), When enabled, the radio prevents any
unwanted conversations in the channel from being heard
unless the call is specifically directed to you and the
required SELCALL ID to open the "Quiet” condition is
received.
To enable:
1, Select the channel you want to put in Quiet Mode using
either the UP/DOWN Switch or the Numeric Keypad.
Example: Choosing CH20 as your CALL Channel
2
.
Press the Key for about 1,5 seconds. You will hear
one beep and the TSQ inBicalor appears on the LCD
Display.
Under this condition, the PTT Switch is temporarily disabled.
If you wish to use the same channel for normal communica
tion, simply remove the Channel from Quiet Mode,
To deactivate the Quiet Condition:
t. Manually select the Tone Squelched Channel
2. Press the CD lor about 1.5 seconds. Two beeps
will be heard and the TSQ indicator disappears from the
LCD display.
UH-057
Page 22