Recharging the nickel*cadmium battery pack, Belt cup installation, Belt – Uniden UH-057 User Manual
Page 16: Installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recharging the Nickel*CadmIum Battery Pack
Note:
Before charging, be sure that the power (ON/OFF
Volume control) is turned OFF.
Recharge the NhCd Battery ONL Y when the unit
indicates a LOW BATTERY condition.
(TX LED blinks during TRANSMIT)
Insert the discharged Battery Pack in the rapid charger, or
connect the trickle charger to the side of the unit.
Using the trickle charger, the standard pack charges fully in
8 hours, and the heavy duty pack in 12 hours. If you have a
rapid charger, the standard pack charges fully in 1.5 hours,
and the heavy duty pack charges fully in 2 hours,
DO NOT leave the Batteries on charger for an extended
period of time.
Belt
cup
Installation
CAUTION:
DO NOT tighten the screws too tight, you could damage the
case.
UH-057
Page14