Uniden UH-057 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

When a call is received while TSQ Scanning, UH-057

lollows the same response as receiving a call on a Tone

Squelch Channel. It differs onl/ on the following.

If the call is not answered within the 20 second period,

TSQ Scanning resumes. CAL indicator remains on the

LCD.

To look for the channel where CALL is received;

a. Cancel TSQ Scanning by pressing either the Q ot

°0 Key.

UP DOWN

b. Using the

O °r Q

Key, browse through the TSQ

Channels.

The CAL indicator marks the channel where the call is

received.

2. When answered, TSQ scanning is automatically

deactivated. The channel is removed from the Quiet
Operating Mode.

To deactivate TSQ Scanning:

UP DOWN

Press either the O Of O Key. SCN indicator disap

pears from the LCD and the unit returns to the Channel
prior to accessing TSQ Scanning.

2. When a SELCALL is received, press the PTT Switch.

Note:

The chance of receiving and decoding Setail Call

effectively while TSQ Scanning can be increased in
many different ways. You can either lessen the

number of channels to be scanned to increase the

scanning

speed,

or change some of the SELCALL

Parameters (please see “Other parameters” on page
30). BE SURE THAT EVERY MEMBER OF YOUR

GROUP USES THE SAME SET-UP. OTHERWISE,

YOU WILL LESSEN THE CHANCE OF SELEC-

TIVEL Y CALLING EACH OTHER.

UH-057

Page 24