Kenwood KRF-V5560D - Manual (Page 5)

Names and functions of parts
Main Unit
Frequency display,
Input display,
AUTO DETECT
O POWER ON/OFF key -il,
(For KRF-V5060D/V4060D/V5560D)
Use to turn the mam power ON/OFF.
© ON/STANDBY ( 6 ) key -U l
(For KRF-V5060D/V4060D/V5560D)
Use to switch the power ON/STANDBY when
the POWER is turned ON
STANDBY indicator
© POWER ON/STANDBY (<0 ) key
(For VR-605/615) - Jl
Use to turn the power ON/STANDBY,
STANDBY indicator
© DIMMER key
Use to select the REC MODE -Lffl
Use to adjust the brightness of the display.
-ijo/
O LISTEN MODE key -Ly.
Use to select the listening mode.
© Surround indicators
DSP mode indicator -£S]
Lights when the receiver is in the DSP mode.
DTS mode indicator -uSJ
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
© SOUND key -QB
Use to adjust the sound quality and the ambL
ence effects.
Q MULTI CONTROL knob
Use to control a variety of settings.
© INPUT SELECTOR knob
Use to select the Input sources.
© VOLUME CONTROL knob
0 PHONES jack
Use for headphone listening.
-ny
-i2E
0 SPEAKERS ON/OFF keys -CS]
Use to turn the speakers ON/OFF.
0 CINEMA EQ key
Use to switch the status of CINEMA EQ.
0 INPUT MODE key -CB
Use to switch between full auto, digital and
analog inputs.
© BAND key
Use to select the broadcast band.
0 AUTO key
Use to change "TAPE" indication to "MD".
Use to select the auto tuning mode. -|22
© MEMORY key
Use to store radio stations in the preset
memory.
0 SET UP key
Use to select the speakers' settings etc.
© MUTE key
Use to temporarily mute the souhd.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back-up the memory. This is called standby mode. Under
the condition, the system can be turned ON by the remote control unit
Connection at POWER ON/OFF key (for KRF-V5060D/V4060D/
V5560D)
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.