Specifications – Kenwood KRF-V5560D User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
/j\ Caution : Read this page carefully to ensure safe
For the U.S.A and Canada
AUDIO section (VR-B05/615)
Rated power output during STEREO operation
100wattsperchannelminimumRMS,bothchannelsdriven,at8Qfrom
40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)
Effective power output during SURROUND operation
FRONT (40 ~ 20 kHz, 0.7% T.H.tf. at
8n
one channel driven)
............................................................................... 100 W + 100 w
CENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8i2 one channei driven)
.....................................................................................................100 W
SURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8n one channel
driven).........................................................................100 W + 100 W
SUBWOOFER (80 Hz, 0.7% T.H.D. at 8Q one channel driven)
(VR-615)....................................................................................... 100 W
Total harmonic distortion................................. 0.05% (1 kHz, 50 W, 8i2)
Frequency response
CD................................................... 20 Hz - 70 kHz, +0 dB, -3.0 dB
Signal to noise ratio (IHF'66)
CD ............................................................................................... 95 dB
Input sensitivity
/
impedance
CD.............................................................................. 550 mV / 47 kfl
DVD/6CH INPUT (VR-615)........................................ 550 mV / 47 kQ
Output level / impedance
TAPE REC....................................................................550 mV / 1 kQ
PRE OUT (SUBWOOFER) (VR-605) .......................... 1.5 V / 2.2 k£l
Tone control
BASS....................................................................+10 dB (at 100 Hz)
TREBLE................................................................±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level.........................................+8 dB (at 100 Hz)
For other countries
AUDIO section (KRF-V5060D/V5560D)
Rated power output during STEREO operation
100 watts per channel minimum RMS,both channels driven,at8nfrom
40 Hz to 20 kHz with no more than 0.7% totai harmonic distortion. (FTC)
Effective power output during SURROUND operation
FRONT (1 kHz, 0.7% T.H.D. at 80 one channel driven)
................................................................................... 100 W+ 100 W
CENTER (1 kHz, 0.7% T.H.D. at 80 one channei driven)
...............................................................................................
100
w
SURROUND (1 kHz, 0.7% T.H.D. at 8Q one channel driven)
................................................................................... 100W + 100W
SUBWOOFER (80 Hz, 0.7% T.H.D. at 80 one channel driven)
(KRF-V5560D) ............................................................................. 100 W
Total harmonic distortion ................................ 0.05% (1 kHz, 50 W, 80)
Frequency response
CD................................................... 20 Hz - 70 kHz, +0 dB, -3.0 dB
Signal to noise ratio (IHF'66)
CD, TUNER, AUX, TAPE............................................................ 95 dB
Input sensitivity / impedance
CD.............................................................................. 550 mV / 47 kO
DVD/6CH INPUT (KRF-V5060D).............................. 550 mV / 10 kO
Output level / impedance
TAPE REC....................................................................550 mV / 1 kO
PRE OUT (SUBWOOFER) (KRF-V5060D) ................. 1.5 V / 2.2 kO
Tone control
BASS....................................................................±10 dB (at 100 Hz)
TREBLE............................................................... ±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level.........................................+8 dB (at 100 Hz)
AUDIO section IKRF-V4060D)
Effective power output during STEREO operation
1 kHz, 0.7% T.H.D.,at 8 Q..............................................50 W + 50 W
Rated power output during STEREO operation
40 watts per channel minimum RMS, both channels driven, at 80 from
40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)
Effective power output during SURROUND operation
FRONT (1 kHz, 0.7% T.H.D. at 80 one channel driven)
.......................................................................................50 W + 50 W
CENTER (1 kHz, 0.7% T.H.D. at 80 one channel driven)
.....................................................................................................50 W
SURROUND (1 kHz, 0.7% T.H.D. at 80 one channel driven)
....................................................................................... 50 W + 50 W
Total harmonic distortion................................. 0.15% (1 kHz, 20 W, 80)
Frequency response
CD................................................... 20 Hz - 70 kHz, +0 dB, -3.0 dB
Signal to noise ratio (IHF'66)
CD, TUNER, AUX, TAPE.............................................................95 dB
Input sensitivity / impedance
CD...............................................................................400 mV / 47 kO
Output level / impedance
TAPE REC....................................................................400 mV / 1 kO
PRE OUT (SUBWOOFER)........................................... 1.5 V / 2.2 kO
Tone control
BASS...................................................................... ±10 dB (at 70 Hz)
TREBLE................................................................±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level.........................................+8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency.......................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical.............................. (-15 dBm - -21 dBm), 660 nm ±30 nm
Coaxial........................................................................0.5 Vp-p / 75 O
VIDEO section
VIDEO inputs / outputs
VIDEO (composite)....................................................... 1 Vp-p / 75 Í1
FM tuner section
Tuning frequency range...................................... 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
VR-605/615
................. 1.3 pV (75 n)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
KRF-V5060D/V4060D/V5560D
................. 1.6 pV (75
a)/
15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO.........................................................28 pV (75
a)/
40.2 dBf
Total harmonic distortion (1 kHz)
MONO...............................................................0.5% (71.2 dBf input)
STEREO........................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO............................................................. 75 dB (71.2 dBf input)
STEREO......................................................... 68 dB (71.2 dBf input)
Stereo separation (1 kHz).................................................................. 40 dB
Selectivity (±400 kHz) VR-605/615.....................................................70 dB
KRF-V5060D/V4060D/V5560D................... 50 dB
Frequency response....................... (30 Hz - 15kHz), +0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range
10 kHz step (VR-605/615)................................ 530 kHz ~ 1,700 kHz
10 kHz step (KRF-V5060D/V4060D/V5560D).......................................
.......................................................................... 530 kHz ~ 1,610 kHz
9 kHz step (KRF-V5060D/V4060D/V5560D).........................................
.......................................................................... 531 kHz - 1,602 kHz
Usable sensitivity (30% mod., S/N 20dB) (VR-606/615)
............................................................................16 pV / (600 pV/m)
Usable sensitivity (KRF-V5060D/V5560D/V4060D)....................................
........................................................................... 16pV/(600 pV/m)
Signal to noise
ratio (30% mod. 1 mV input)................................50 dB
GENERAL
Power consumption VR-605/615........................................................2.2 A
KRF-V5060D/V5560D................................... 280W
KRF-V4060D .................................................200W
AC outlet
SWITCHED
VR-605/615............................................. (total 150 W, 1.25 A max.)
KRF-V5060D/V4060D/V5560D................................ (total 90 W max.)
Dimensions.........................................................W:.440 mm (17-5/16")
H : 143 mm (5-5/8")
D : 303mm(11-15/16")
Weight (Net)
VR-605/615.................................................................7.7 kg (17.00 lb)
KRF-V5060D/V5560D................................................ 8.8 kg (19.40 lb)
KRF-V4060D.............................................................. 7.9 kg (17.41 lb)
35'