Example: [sl16] mode connections, Ìsl161, Rsl161 [xs] [xs8] [xr] ìsl161 [xs] [xs8 – Kenwood KRF-V5560D User Manual
Page 15: Receiver, Cassette deck or md recorder, Cd player, Record player, System control operations, Remote control, Automatic operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up the system
Connecting the system control
Connecting system control cords after connecting a KENWOOD
audio component system lets you take ac^antage of convenient
system control operations.
This unit is compatible only with the [SL-16] mode. The system
control operation is not available if the unit is connected in the
[XS8], [XS], or [XR] connection mode.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
SYSTEM CONTROL
cord
You may connect the system control cord to either the up or down
jack
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control
mode
ÌSL161
rSL161 [XS] [XS8] [XR]
ÌSL161 [XS] [XS8]
[XS]
Receiver
Cassette deck
or MD recorder
CD player
n
SYSTEM
CONTROL
cord
Record player
In order to take advantage of the system control operations, the
components must be connected to the correct jacks. To use a CD
player it must be connected to the CD jacks. To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks.
When using more than one CD player (etc.) only the one connected
to the specified jacks may be connecfed for sysfem control
Some CD players and cassette decks are not compatible with the
ISL16] system control mode. Do not make system connections
with equipment that is not [SL16] compatible.
Some MD players are not system control compatible You cannot
make system control connections to this kind of equipment
Notes
1 ISL16] equipment cannot be combined with [XR], IXS], and (XS81
equipment for system operations. If your equipment consists of
this kind of combination, please do not connect any system control
cords. Even without system control cords, normal operations can
be carried out without effecting performance.
2 Do not connect system control cords to any components other
than those specified by KENWOOD. If may cause a malfunction
and damage your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver.
Automatic Operation
When you start playback from a source component, the input selector
on this uhit switches to that component automatically.
Synchronized Recording
Lets you synchronize recording with the start of playback when
recording from CD, MD or analog discs.
15
'