Preparation – Kenwood TK 3100 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATION
■ Installing/ Removing the NiCd Battery Pack
The battery pack is not charged at the factory;
charge it before use {page 19}.
Average battery pack life:
•
KNB-14 (supplied): 8 hours (ProTaik™ VHF/UHF)
•
KNB-15A (optional): 10 hours (ProTalk^^ VFIF/ UFIF)
Average times are calculated using 5% transmit
time, 5% receive time, and 90% standby time.
CAUTION:
♦
DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE
OF THE BATTERY BY FiRE.
♦
NEVER ATTEMPT TO REMOVE THE CASING FROM THE
BATTERY PACK.
1 Match the four grooves of
the battery pack with the
corresponding guides on
the back of the
transceiver.
2 Slide the battery pack
along the back of the
transceiver until the
release latch on the base
of the transceiver locks.
3 To remove the battery
pack, puli back on the
release latch and slide
the pack away from the
transceiver.