Installing the (optional) speaker/ microphone – Kenwood TK 3100 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing the Cover over the Speaker/ Microphone Jacks

If you are not using a

speaker/ microphone, install

the cover over the speaker/

microphone jacks using the

supplied 3x6 mm screw.

Note: To keep the transceiver water
resistant you must cover the

speaker/ microphone jacks with the
supplied cover.

Speaker/

microphone

jack cover

Installing the (Optional) Speaker/ Microphone

1 Insert the speaker/

microphone plugs into the
speaker/ microphone

jacks.

2 Attach the locking bracket

using the supplied

3x6 mm screw.

Note: The transceiver is not fully

water resistant while using the

speaker/ microphone.

locking bracket

This manual is related to the following products: