Troubleshooting guide – Kenwood TK 3100 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING GUIDE
Problem
I
Solution
No power.
: • The battery pack may be
dead. Recharge or replace
the battery pack.
• The battery pack may not
be installed correctly.
Remove the battery pack
and install it again.
Battery power dies
shortly after charging.
The battery pack life is
finished. Replace the battery
pack with a new one.
Cannot talk to or hear
other members in your
group.
• Make sure you are using
the same frequency and
Quiet Talk tone as the other
members in your group.
• Other group members may
be too far away. Make sure
you are within range of the
other transceivers.
Other voices (besides
group members) are
present on the
channel.
Change the Quiet Talk tone.
Be sure to change the tone
on all transceivers in your
group.
22