Kenwood MS-A5 - Manual (Page 24)

24
- --• -. ........................ ,................
JRBCordina of CD playback (Edit function)
Ai-r-v■:,■■-■■:,vv^vv.v---. ■ -:-■, ', -'- .V. ............................................ .
The edit function is used for editing tunes from a CD for recording them onto a cassette tape. Three types of editing
are available with this unit, as described below.
1. Normal edit
When the recording time of the tape is entered, the unit auto­
matically assigns tunes from the CD for recording thenn on
sides A and B of the tape. For the end of side A, the tune which
best fits into the remaining time on that side is automatically
selected.
• Editing is carried out for all tracks up to track number 22.
If there is no tune available which can fit in the specified tape
recording length, "NO FiLE" is displayed and the edit func­
tion is canceled.
2. Program edit
By programming tunes in advance and selecting normal edit
mode, editing is earned out using the programmed tunes.
• If a track with a track number of 23 or greater ts pro­
grammed, that track will not be inciuded in the editing pro­
cess.
CD (track mode)
1 ^1 : 1 3 4 5 6
Tape
> * > Т ч \
Ш ' п 1 1 2 1 ГГ11 3 1 4 \ 6 Ш Ш
1
A 10-second space is
inserted.
CD (program mode)
T
A IQ-second space is
inserted.
\ 4 5 2 3 6
Tape
^
Bi i i 4 | Г | й 5 I 2 | 6
A 10-SBCond space is
inserted.
A 10-second space is
inserted.
3. Al edit
This mode automaticaily makes sure that all tunes from a CD
are recorded onto the tape, if the CD recording time is longer
than the tape, the unit automatically fades out the ends of each
tune so that all tunes can be recorded.
• If the tape is extremely short, all tunes from the CD may
not be recorded.
CD
1 2 3 4 5 6
Пл
/
2>L
/ XZ^
5 >[6>|G
A 10-second space is
inserted. A 10-second space is
inserted,
EDIT key
In the CD mode, the display changes one by one as shown
below every time the EDIT key on the remote control unit is
pressed:
Ш Ш ................Normal EDIT
I Program EDIT
1^ШШ ..........Al EDIT
I