Remove the cover, Remôwmwmi unît, Loading batteries 121 – Kenwood MS-A5 User Manual

Page 12: Operation procedure

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

remôwmwmi unît

Loading batteries

121

B Insert batteries.

B Close the cover.

Insert two AA-size (R6) batteries as indicated by
the polarity marking.

Remove the cover.

Slide the cover pressing the

Operation procedure

Plug the power cord of the system into an AC wall out
let, and press the! POWER

key to turn the power on.

The remote control unit is effective only in the range
shown in the figure right.

* When two operation keys on the remote control

unit are pressed successively, press each key se
curely reserving an interval of more than 1 sec
ond for each press.

POWER key

i^/P29! [

sleep

! timer key

EDIT I mode key

CD / tuner section
operating keys

I PROGRAM

enter

! key

»fPI^ [PROGRAM MODEl key-

nh*.bPllt:H * ■ IIVULXJIVIL

fePiSiÇ

P.MGK P.CAU. t ^

Remote control light
sensor

KENWOOD

> ACOUSTIC select key (ASLC key)
• Natural bass (N.B.) circuit key

Tape deck operation keys

REPEAT key

Volume control keys

PROGRAM CALL key

I I Names in boxes refer to keys only available on the remote control unit.

Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.

2. When the remote-controilable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a fluorescent lamp using an inverter enters the remote control light sensor.

In such a case, change the system installation position to prevent the malfunction.