Kenwood MS-A5 - Manual (Page 23)

CD synchronized recording
When recording a CD, rt is possible to start or pause re­
cording using only the CD keys, without having to press
the keys in the tape section.
Preparations
CD Insert a cassette tape.
@ Select reverse mode (either to record
both sides once or to record one side
CD
only).
Select DOLBY NR if desired.
CD Select the direction of tape
movement: A (forward) or B
(reverse),
Insert the CD to be recorded.
uzea recording
Set the input to CD.
TAPE TUNHl CO ^ ! CD/TAPE
O
^ain Uni! 1 I Control Unit ^
After setting the input to CD, stop {or pause) the CD from
playing by pressing the key (or the "OOD" key) in the
CD section.
Press the RECORD and PAUSE keys simultaneously.
>REC »PAUSE
(5) ®
Start playing the CD.
□ MD
Remo.e
X' I Control Unit X' ^
To pause recording.
Press the REC and PAUSE keys on the tape deck simulta­
neously.
When performing this operation on the remote control unit,
press the key and then immediately afterward press
the
" I I " key,
The unit will start recording as soon as the CD begins play­
ing.
When the CD has ended, recording will also stop.
□ >aa
Be.o.e
D Control Unit ^
The CD will pause and the tape will record silence for
around 4 seconds and then pause as well.
To start recording again, press the "c>0D" key again on the
CD player.
To stop recording.
\ Remote X.
ain Unit ' Control Unit '
Press the stop key on the CD player.
The tape will record around 4 seconds of silence and then
stop.
When the key on the cassette deck has been pressed
to stop recording, the CD will continue playing.