Safety precautions, Before applying power a – Kenwood DP-M4010 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before applying power A
Caution: Read this page carefully to keep your safety.
For the U.S.A, and Canada
Important!
Units shipped to the U.S.A. and Canada are designed for
operation on 1 20 volts AC only.
For Australia and Europe
Important!!
Units
shipped
to
Australia
are
designed
for
operation
on
240 V AC only.
Units shipped to Europe are designed for operation on 220 V
AC only.
For the United Kingdom
For other countries
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior to
any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
Blue............................................... Neutral
Brown............................................. Live
The wires in this mains lead must be connected to the
terminals in the plug as follows;
Wire colour
Plug terminal marking
Blue............................................... N or Black
Brown............................................. L or Red
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper setting
of this switch.
AC voltage selection
This unit operates on 110-1 20 or 220-240 volts AC. The AC
voltage selector switch on the rear pane! is set to the voltage
that prevails in the area to which the unit is shipped. Before
connecting the power cord to your AC outlet, make sure that
the setting position of this switch matches your line voltage,
if not, it must be set to your voltage in accordance with the
following directions.
Note:-------------------------------------------------------------------------
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
ACn0-120VO/-^^AC220-240V^ AC1 10-120VO/-<4fr'AC220-240VA/
This shows switch
lever is locked in the
110-120V Ay position.
This shows switch
lever is locked in the
220-240V
'\j
position.
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
AC voltage selector switch
Safety precautions
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
^ 1
R)SK 0F £l£CTR1C SHUCK.;
DONOTOPFry,,;.
l A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER
VICING TO QUALIFIED SERVICE PERSONNEL
THE
LIGHTNING
FLASH
WITH
ARROWHEAD
SYMBOL,
WITHIN
AN
EQUILATERAL
TRIAN
GLE. IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DAN
GEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
A
THE EXCLAMATION
POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE
USER
TO
THE
PRESENCE
OF
IMPORTANT
OPERATING
AND
MAINTENANCE
(SER
VICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE,