Kenwood DP-M4010 - Manual (Page 14)

Programmed play
(Program mode)
It is possible to program and play a maximum of 32 tunes in a desired sequence.
OiSPH.Ay P"WODe REPEAT CHECK CLEAR M PrograiTsmiing
1. Press the P-MODE key to put in the program mode.
Program No.
Blinks
E"1—j 05C ^ 5
¡Ji—j j
j
«Q 3H40U! T
!'i—) 1 1 L n n - n n
AUTO SPACE function
When in the program mode, intervals with no sound of
about 4 seconds are created between the programmed
tracks. This function is for making use of the DPSS system
on the cassette deck.
2. Select the desired disc number by the DISC SELEC­
TOR keys [T] ~ [U.
® Example: If the [2] is pressed, the indicator be­
comes as shown on the left diagram.
3. Select the desired track numbers with numeric
[U ~ [S 1 + 101 within 5 seconds after
the disc is selected.
« Example; While the display is as indicated in the
diagram on the left when [B] is pressed, you can
program the next track without waiting for the
display to change.
« You can specify up to 32 programs in the same
operation as steps 2 and 3. ,
« When programming tunes on the same disc, selec­
tion can be made by only using the numeric keys
E'-iSland FPTol.
« If you select a wrong track number, press the clear
key once, then select the desired track again.
« When disc numbers or track numbers are specified
which do not exist, these numbers are initially
programmed. But when the play starts, they are
automatically canceled.