Kenwood DP-M4010 - Manual (Page 15)

Checking a program
Exampto of when the CHECK key is pressed
j P^cT] ¡jluminates and goes out
after several minutes.
{oi—1 disc
J
[.j™) I
[^1-) _ _
—3 / i L. n
m-i U J ■ r
tggL
/"( /
u >
Track number being checked
The display shows the program numbers
being checked and then returns to 00:00 after
several seconds.
Press the CHECK key to confirm program contents,
® Each time you press the CHECK key, the display
shows DISC No. and track number in programmed
sequence.
Example of when a program is changed
CJJSC
(si—3 / r~i
t-!~3
[31—.}
[=1------ ]
/ TfiACK
NO, SlwGLG riMe
n
n n -n n u
/ u u -u u
Number of the track after
the change
H Changing a program
1. Press the CHECK key until the display shows the
track number that you wish to change.
2. While the i P;C.l is lit up, select your desired track
by using the DISC SELECTOR key and the numeric
keys.
« Track being played cannot be changed.
m Playing a program
After completing the programming, press the PLAY/
PAUSE key |.
« The play indicator (>-} blinking while programming
stops blinking and lights up continuously. Then your
tracks are played as you programmed them.
Playing from a particular track of a
program
1. Press the SKIP key i M 1 to advance to the next
program.
2. Press the SKIP key to go back to the
previous program.
« The play starts from the beginning of the selected
track. ___
* if you press the 1 1 key once during play, it starts
from the beginning of that track.
ii Adding a track
During the program mode you can add programs to
the end by selecting the appropriate track numbers
using the DISC SELECTOR key and the numeric keys.
H Erasing a program
Press the CLEAR key.
® To erase the program contents from the last one in
order, press the CLEAR key each time.
« All program contents will be erased if you perform
any of the following operations.
® Pressing the P-MODE key and switching into the
TRACK mode, _
(D Pressing the EJECT key [4).
@ If the player is stopped and you press the CLEAR key
as many times as there are tracks on the program.
(^Turning off the power.
M Stopping programmed play
Press the STOP key @.
® if you then press the PLAY/PAUSE key ,
the play starts once more from the beginning of
the program.