Service, Before calling service, Yellow flames – Bosch L0609466 User Manual
Page 25: Yellow tips on outer cones, Soft blue flames
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Service
Before Calling
Service
Yellow Flames:
Further adjustment is required.
Yellow Tips on Outer Cones:
Normal for LP Gas.
Soft Blue Flames;
Normal for Natural Gas.
If the flame is completely or mostly yellow, verify that the regulator is set for the
correct fuel. After adjustment, retest.
Some yellow streaking is normal during the initial start-up. Allow unit to oper
ate 4-5 minutes and re-evaluate.
Figure 24: Checking Flame Characteristics
When correct color, carryover and size are verified, installation is complete.
See Use and Care Manual for troubleshooting information. Refer to the Warranty
in the Use and Care Manual.
To reach a service representative, see the contact information at the front of the
manual. Please be prepared with the information printed on your product data
plate when calling.
Product Data Plate
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service. It is located on the frame near the drawer.
Open the drawer to view it.
English 23