Lower firebox hinges, Lid handle and upper hinges – Kenmore 415.161108 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
14
Lower
Firebox Hinges
: Attach lower hinges to back of firebox using #10-24x1/2" screws, 5mm fiber washers and #10-24 flange nuts. The center flat
portion of the hinge should be at the bottom (see inset).
27
34
5mm Fiber Washers
13
15
Lid Handle and Upper Hinges
Attach handie to lid with 5.5mm ID, 19mm OD fiber washers, 5.5mm ID, 19mm OD flat washers and #10-24x3/4” screws.
Attach upper hinges to back of lid with #10-24x1/2" screws, 5mm fiber washers and #10-24 flange nuts. Hinges should curve
downward when properly installed.
Handie
27
#10-24x1/2"
Screws
Qty:4
■V:
34
13
5mm Fiber Washers #10-24 Flange Nut
Qty
: 8
Qty:4
#10-24x3/4"
Screws
Qty:2
5.5mm ID, 19mm OD 5.5mm ID, 19mm OD
Fiber Washer
Flat Washer
Qty:
6
Qty: 2
5.5mm Fiber Washers
464810408*21