Left leg, Right leg – Kenmore 415.161108 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY - Modelo No. 415.16110800
Left Leg
I.: Place one upper leg as shown . NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side
brace and left front leg (curve) with #10-24x1-1/4" screw and #10-24 flange nut. In back, attach upper leg, side brace and left
back leg (straight) with #10-24x1-1/4" screw and #10-24 flange nut. Do not tighten.
: Attach support bracket In second hole from bottom of leg with hinge pins and hitch pins (A).
12
#10-24x1-1/4"
Screw
Qty
. 2
13
#10-24 Flange Nut
Qty.2
Right Leg
Place other upper leg as shown. Attach upper leg and right front leg (curve) with #10-24x1-1/4" screw and #10-24 flange nut.
Then attach upper leg and right back leg (straight) with #10-24x1-1/4" screw and #10-24 flange nut. Do not tighten .
Attach support bracket with #10-24x1-1/4" screws and #10-24 flange nuts.
Upper Leg
12
#10-24x1-1/4"
Screw
Qty.4
13
#10-24 Flange Nut
Qty. 4
13
Right Front Leg
RinhfR=rH«n
1^"='
""S) \
12
Supp,
3cket
h
Leg Extender
464810408
*
13