Pioneer VSX-D710S - Manual (Page 23)

Display
Displays & Controls
SIGNAL SELECT
□D DIGITAL DTS
ANALOG DIGITAL
(D 6) (7) (8
dt«
□□DIGITAL SB #ATT
□□PRO LOGIC I^DSP
DNR
DIRECT
MIDNIGHT
LOUDNESS
MONITOR_____________
SP ► AB/TUNED
(MONO STEREO
!M! IMI IMI IMI (Ml. (Ml,
IMI
dB
: : I___ i
©
©
@
SIGNAL SELECT indicators
Light to indicate the type of input signal assigned for
the current component (see “Front Panel“, ®
SIGNAL SELECT) When the AUTO setting is being
used on VSX-D810S & VSX-D850S receivers a set of
brackets will appear around the SIGNAL SELECT
indicators
□□DIGITAL : Lights when a DOLBY DIGITAL
signal is played
DTS Lights when a source with DTS audio signals is
played
ANALOG Lights when an analog signal is selected
DIGITAL Lights when a digital audio signal is selected
[ ] Lights when the AUTO setting is selected (VSX-
D810S/D850S only)
DTS indicator
Lights when DTS mode is being used
□□ DIGITAL indicator
When the □□ (DOLBY)/DTS mode of the receiver is
on, this lights to indicate playback of a Dolby Digital
signal However, □□ PRO LOGIC lights during □□
channel playback of Dolby Digital
□□ PRO LOGIC indicator
When the □□ (DOLBY)ATTS mode of the receiver is
on, this lights to indicate playback of a Dolby Pro
Logic source
DSP indicator
Lights when any Advanced Theater or DSP mode is
selected
Surround Back indicator (VSX-D810S/D850S only)
Lights when most Surround Back channel flag encoded
(6 Ichannel) software is playing (With some Surround
Back channel software the surround back indicator
won’t light because there is no flag encoded in the
software) If you play DTS 5 1/6 1 channel software
surround sound will be heard whether it is encoded
with a surround back channel flag or not
OVERLOAD indicator
This lights when an analog signal is too strong (the
SIGNAL SELECT needs to be on ANALOG) It
indicates the sound is distorting and the input signal
should be reduced
ATT indicator
Lights when ATT is used to attenuate (reduce) the
level of the input signal (can only be used in
ANALOG mode)
® ©
) DIRECT indicator
Lights when source DIRECT is in use This function
bypasses all tone, channel levels, DSP and Dolby
Surround effects
MIDNIGHT indicator
Lights when MIDNIGHT listening mode is in use
LOUDNESS indicator
Lights when the LOUDNESS is on LOUDNESS is
used to boost the bass and treble when listening at
low levels
) SPEAKER indicator
Shows if the speaker system is on or not SP ►A
(and/or) B means speakers are switched on SP ►
means speakers are switched off
]) MONITOR indicator
Lights when MONITOR is selected to hear a
recording as it's being made (see page 34)
^ TUNER indicators
MONO
Lights when the mono mode is set using the
MPX MODE button
TUNED
Lights when a broadcast is being received
STEREO
Lights when a stereo FM broadcast is being received
in auto stereo mode
I MASTER VOLUME LEVEL
Shows the overall volume level Volume level is
maintained even when the power is off —
dB
indicates the minimum level, and OdB indicates the
maximum level
• Depending on the level settings you make for
individual channels, the MAX level can range
between -lOdB and OdB
}) DNR indicator (VSX-D810S/D850S only)
Lights when the digital noise reduction is on Use to
reduce extraneous noise It can be used with any
sound mode
I CHARACTER display
Shows the radio frequency or function (DVD/LD,
CD, etc ) receiver is using
23
En