Component input 1 setting, Optical digital input 1 setting, Component input 2 setting – Pioneer VSX-D710S User Manual

Page 20: Coaxial digital input setting, Optical digital input 2 setting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Preparations

Component input 1 setting

Tells the receiver What (DVD player, etc) is connected to

this input

Optical digital input 1 setting

Here you tell the receiver what component you have
hooked up to the optical input jack 1

Press A or V to select the component setting

(DVD, TV, VCR or OFF)

MEMO:

• The initial setting is “DVD”

Press A or V to select the optical digital
input 1 (DVD, TV, CD, CD-R, VCR, or OFF)

After you assign a component to this digital jack

whenever you select that component, for example a

CD player, the receiver will automatically change to
the digital input setting You can see this in the

DIGITAI7ANALOG indicator on the front of the

Component input 2 setting

Tells the receiver What (TV player etc ) is connected to
this input

MEMO:

• The initial setting is “CD”.

Press A or V to select the component setting
(Ty VCR, OFF or DVD)

MEMO:

• The initial setting is

“TV”

Multi Channel External Decoder

Surround Back 1ch/2ch setting (VSX-
D810S/VSX-D850S only)

You only need to make this setting if you are using a

multi channel external decoder with your DVD player If

you aren’t just ignore this setting

Press A or V to select the channel setting
Select Ich if your DVD is outputting 6 1
sound (the surround hack channel is mono)

or select 2ch if your DVD is outputting 7 1

sound (the surround back channel is stereo)

Coaxial digital input setting

Here you tell the receiver what component you have

hooked up to the coaxial digital input jack

Press A or V to select the coaxial digital
input (DVD, TV, CD, CD-R, VCR, or OFF)

After you assign the component to this digital jack
whenever you select that component, for example a

CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAL/ANALOG indicator on the front of the

receiver

MEMO:

• The initial setting is “DVD”.

Optical digital input 2 setting

Here you tell the receiver what component you have

hooked up to the optical input jack 2

Press A or V to select the optical digital

input 2 (DVD, Ty CD, CD-R, VCR, or OFF)

After you assign a component to this digital jack
whenever you select that component, for example a

CD player, the receiver will automatically change to
the digital input setting You can see this in the

DIGITAIVANALOG indicator on the front of the
receiver

MEMO:

• The initial setting is “CD-R”

Optical digital input 3 setting (VSX-
D810S/VSX-D850S only)

Here you tell the receiver what component you have

hooked up to the optical input jack 3

Press A or V to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF)

After you assign a component to this digital jack,
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAL/ANALOG indicator on the front of the

MEMO:

• The initial setting is “TV”.