Pioneer VSX-D710S - Manual (Page 2)

W A R N I N G :
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE
THE STANDBY/ON BUTON IS SECONDARY
CONNECTED AND THEREFORE DOES NOT
SEPARATE THE UNIT FROM MAINS POWER
IN STANDBY POSITION
IMPORTANT
A
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER {OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
SERVICING
TO QUALIFIED SERVICE
PERSONNEL
A
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance
NOTE: This equipment has been tested and found to compiy with the iimits for a Class B digitai device,
pursuant to Part 15 of the FCC Ruies These limits are designed to provide reasonable protection against harmful
interference in a residentiai instaiiation This equipment generates, uses, and can radiate radio frequency energy
and, if not instaiied and used in accordance with the instructions, may cause harmful interference to radio
communications However, there is no guarantee that interference wiil not occur in a particuiar instaiiation if
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
IMPORTANT NOTICE
The serial number for this equipment is located on the
rear panel Please write this serial number on your en­
closed warranty card and keep it in a secure area This
is for your security
[For Canadian model]
This Class B digital apparatus complies with
Canadian ICES-003
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada
[For Canadian model]
CAUTION
: TO PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE
ATTENTION:
POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE
COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSERESS A
FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT
Manufactured under license from Dolby Labo­
ratories "Dolby", "Pro Logic" and the double-D
symbol are trademarks of Dolby Laboratories
Confidential Unpublished Works © 1992-1997
Dolby Laboratories, Inc All rights reserved
"DTS", “ES" and “DTS Digital Surround" are
trademarks of Digital Theater Systems, Inc
Manufactured under license from Digital
Theater Systems, Inc
[For U S model)
As an E nergy S tar ® Partner, Pioneer
Corporation has determined that this product meets
the E nergy S tar ® guidelines for energy
efficiency kmi En
If the socket outlets on the associated equipment are not
suitable for the plug supplied with the product, the plug must
be removed and an appropriate one fitted Replacement and
mounting of an AC plug on the power supply cord of this unit
should be perfomed only by qualified service personnel The
cut-off plug must be disposed of as an electrical shock hazard
could exist if connected to a socket outlet
HoaaAEn
2
En
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to
operate the equipment