beautypg.com

When the self-clean cycle is completed, To start the delayed self-clean cycle, Instructions – Kenmore GAS A GE-SLIDE IN MODEL 790.3104 User Manual

Page 40: U l l n, Self-cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PRESS

2

.

C D ® ® "

CD®®

3. Press START .The "DOOR LOCKED" icon will flash;

"CLEAN" and the letters "CLn" will remain on in the display
(Figure 2).

4. Press

Enter the desired start time using the number

pads

(Figure 3).

5. Press START . "DELAY", "DOOR LOCKED " and " CLEAN "

icons will remain on (Figure 4).

6. As soon as the control is set, the motor driven oven door lock

will begin to close automatically. Once the door has been

locked the "DOOR LOCKED" indicator light will quit flashing

and remain on.

7. The control will start the self-cleaning at the set start time, for

the period of time previously selected. At that time, the icon

""DELAY" will go out; ""CLn" and oven icon will appear in the

display (Figure 5).

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display.The time of day, the ""DOOR

LOCKED" and "CLEAN " icon will remain in the display
(Figure

6).

2. Once the oven has cooled down for approximately 1 HOUR,

and the "DOOR LOCKED" is no longer displayed, the oven
door can then be opened (Figure 7).

START

/DelayN

\Star^

START

DISPLAY

Self-Cleaning

To Start the delayed Self-Clean Cycle

The FLEX CLEAN

DELAY START (^) pads and length of clean cycle, controls the Delayed Self-Clean

operation. The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO
START THE SELF-CLEAN CYCLE for recommended clean times.

INSTRUCTIONS

To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)

1. Be sure the clock is set with the correct time of day and the

oven door is closed.

Press (g). "CLEAN" will flash and "3:00" HR will show in

the display (Figure 1). The control will automatically clean for
a 3 hour period (default self-cleaning cycle time). Note: If a 2

or 4 hour clean time is desired, press (^2^

for 2

hour or press (T)

(5^ for a 4 hour clean time. Set

the cleaning time based on the amount of soil—light, medium
or heavy (*See previous page).

D - n n

n

J U U

l l d

Figure 1

Dn

r

D u L

LLn

Figure 2

n n ^

U

L L n

Figure 3

Figure 4

n ri

U L L n

Figure 5

Figure

6

I

Figure 7

40