Kenmore GAS A GE-SLIDE IN MODEL 790.3104 - Manual (Page 10)

Before Setting Surface Controls
Locations of the Gas Surface Burners
Your range is equipped with gas surface burners with different
BTU ratings. The ability to heat food quicker and in larger
volumes increases as the burner size increases.
The small SIMMER burner is best used for simmering delicate
sauces, etc. This burner is located at the right rear burner
position on the cooktop.
The STANDARD burner can be used for most surface cooking
needs. This standard burner is located at the left front position on
the cooktop.
The POWER burners are best used for bringing large quantities
of liquid rapidly up to temperature or when preparing larger
quantities of food. The POWER burners are located at the right
front (some models) and left rear positions on the cooktop.
The DUAL burner (some models) can be used as a standard
burner or a power burner depending on the setting you are using.
The DUAL burner is located at the right front on the cooktop.
Regardless of size, always select cookware that is suitable for
the amount and type of food being prepared. Select a burner and
flame size appropriate to the pan. Never allow flames to extend
beyond the outer edge of the pan.
Figure 1
10