Kenmore GAS A GE-SLIDE IN MODEL 790.3104 - Manual (Page 22)

The BAKE (Bake) pad controls normal baking. If preheating is necessary, refer to the (S) Preheat Feature for
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (the sample shown below
is for 350° F).
INSTRUCTIONS
Setting Oven Controls
Setting Bake
PRESS
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press (Bake), "350" will appear and "BAKE" will flash in the
display(Figure 1). If a bake of 350°F is needed, press
start .
3. Press CK^ (Figure 2). "BAKE" will continue to flash
and "375°" will appear in the display.
4. Press START . The actual temperature will be displayed (Figure
3). A beep will sound once the oven temperature reaches 375°F
and the display will show "375°" and "BAKE" (Figure 4).
Pressing (sro^ will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press (Bake)
(Figure 5) and "375" will appear and "BAKE" will flash in the
display.
2. Press (Figure 6). "BAKE" will continue to flash
and "425°" will appear in the display.
3. Press
START
.
Note: After 6 minutes of the first rise of temperature, the convection
fan will be activated to allow the oven to reach its target temperature
faster. The Bake and Broil burners and the Convection element will
also cycle for a better heat distribution.
CDCDCD
START
(DCDCD
START ;
DISPLAY
30 35u
Figure 1
Figure 2
jn mn°
Du luu
Figure 3
Figure 4
Figure 5
Figure 6
22