Stitching, Turning a corner – Kenmore 15/I649 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STITCHiNG
All decorative patterns are possible with double needle.
Before starting any stitching operation, check needle drop
by turning the handwheel manually, Meedle should enter
fabric without touching pressar foot and needle plate.
The stitch width control must not be advanced beyond 2^
setting.
TURNING A CORNER
To turn a Square corner when stitching with a double needle,
stop stitching with the longer needle tip just piercing the
fabric Raise the presser foot, shift fabric half the turn,
lower presser foot and take one stitch. Raise the presser
foot again, complete the turn, and begin stitching in the new
direction