beautypg.com

Kenmore 415.165059 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Control Panel and Firebox Support

I

Stand cart upright.

In front, fit control panel between left and right legs. Insert #10-24x2” machine screws to hold panel in place. Place upper

firebox supports onto screws making sure angle side is facing the front and attach with # 10-24 flange nuts.

In back, attach upper firebox support with #10-24x2” machine screws and # 10-24 flange nuts.

#10-24x2”

Machine Screw

Qty.8

I

#10-24

Flange Nut

Qty.8

#10-24x2”

Valve/Hose/Regulator and Ignitor

Attach valve/hose/regulator assembly to control panel using #10-24x1/2” machine screws.

_ Remove ignitor cap and plastic hex nut from Electronic Ignition Module assembly. Insert module into the opening on

control panel and attach with the removed hex nut. Place AAA battery into module slot with positive end (+) facing

outward. Screw ignitor cap onto module.

■ Button

#10-24x1/2”

Machine Screw

Qty.2

#10-24x1/2”

Machine Screw

K

„...■ AAA

Battery

....Hex Nut

\

Valve/ Hose/ Reaulator

Assembly ..

16

-464722309

-464722509