Kenmore 88963 - Manual (Page 47)

CARE AND CLEANING
The oven cavity is made of stainless steel and should be cleaned with a detergent speciaOy formulated for
stainless steel. •
After convection cooking in particular, the interior of the oven tends to be stained with spattered oil. It is
recommended that the oven be cleaned each time after use before the oil spatters harden and become
difficult to remove
For best performance and safety, the inner door panel should be free of food or grease build-up. Wipe
often with a mild detergent, rinse, and wipe dry. Never use rough powders or pads.
After cleaning the control panel, touch CLEAR. This will dear any entries that might have been entered
acddentally while cleaning the panel.
REMOVABLE PABIS
After each use of the Temperature Probe, it must be removed from the socket Use pot holder, as the
wire, plug and sensor sections may be hot. Wipe food or liquid from sensor with damp cloth.
The Ceramic Tray and Metal Rack can be removed for cleaning at the sink. Wipe up spillovers with paper
towel or doth before removal the tray
Wash In warm soapy water and wipe dry. Do not use rough cleaning powders, steel wood, or rough
cleaning pads,
Tbe fan cover {inside oven top) can be gently wiped in place or removed for washing with detergent in a
sink. Handle with care when washing in a sink The fan cover can be removed by taldng out the soew
used to hold it in place, then slide the cover carefully to the right.
Avoid hitting or bending the metal stirrer blade, as this may cause uneven cooking or microwave power loss
To replace, set the cover in the tab at the top of the oven and secure it using the saew at right,
CAUTION:
The fan cover is coated with Teflon’ for easy cleaning. Do not apply abrasive powders, metal or nylon
wash pads, nor any metal objects such as knives and forks to the fan cover. Hard objects and abrasive
cleaners may scratch the coating. To dean, use only a foam sponge or wash cloth with a mild kitchen
cleaner.
NOTE: Should the Teflon* coating be scratched off, the oven function will not be affected.
SPECIAL CARE
For best performance and safety, the inner door panel and the oven front frame should be free of food or
grease build-up. Wipe both often with a mild detergent. Then rinse and wipe dry. Never use rough
powders or
pads '
After cleaning the control panel, touch CLEAR. This will clear any entries that might have been entered
accidentally while cleaning the panel-
47