Kenmore 790. 4789 User Manual
Electric built-in oven, Horno de pared
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Oven Veni and Racks
- Control Pad Features
- Consumer Defined Control
- Consumer Defined Control Features
- Setting Temperature Display — Fahrenheit or Celsius:
- INSTRUCTIONS
- To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
- INSTRUCTIONS
- To set the Preheat temperature for 375°F
- To change Preheat temperature while oven is preheating (example: changing from 375°F to 425°F)
- PRESS
- DISPLAY
- INSTRUCTIONS PRESS
- To set the Bake Temperature to 375T
- To change the Bake Temperature (example: changing
- from 375T to 425T}
- Setting Oven Controls
- Setting Oven Controls
- Setting Convection Roast
- INSTRUCTIONS PRESS DISPLAY
- To Set the oven to Convection Roast at 375°F
- To change the Convection Roast temperature (example: changing from 375°F to 425°F)
- Setting Convection Convert
- To change from a norma! bake recipe to a convection bake recipe (example: changing a 400° (204°C) normal bake recipe to a convection bake recipe)
- Setting Oven Controls
- Setting the Slow Cook Feature
- INSTRUCTIONS
- To Program the Oven to begin baking with the Slow Cook feature
- PRESS
- DISPLAY
- INSTRUCTIONS PRESS
- To program the oven to begin baking immediately and to shut off automatically (example: BAKE at 350°F for 30 minutes)
- INSTRUCTIONS PRESS DISPLAY
- To program the oven for a delayed BAKE start time and to shut off automatically (example: baking at 350°F, starting at 5:30 and baking for 30 minutes)
- Setting the Warm & Hold^” Feature
- INSTRUCTIONS PRESS DISPLAY
- To set Warm & Hold
- To set Warm & Hold to turn ON automatically
- INSTRUCTIONS
- To set the oven to broil at 500°F.
- PRESS
- DISPLAY
- □ n cn n”
- Setting the Slow Cook Feature
- Press (i) (2) (O)- CD®®
- Setting Oven Controls
- Setting Oven Controls
- Setting Oven Controls
- Using the Temperature Probe Feature
- IMPORTANT:
- I The probe can be damaged by very high temperature. To protect the probe against this damage, the oven control will not allow you to start a self-clean or broil while the probe is connected.
- Self-Cleaning Oven
- What to Expect during Cleaning
- Self-Clean Cycle Time Length
- Â CAUTION
- PRESS
- INSTRUCTIONS
- To set the controls for a 3 hour Self-Cleaning cycle to start immediately and shut off automatically
- ik CAUTION
- DISPLAY
- ■UU L L n
- When the Self-Clean Cycle is Completed
- Stopping or Interrupting a Self-Cleaning Cycle
- To Start the delayed Self-Clean Cycle
- INSTRUCTIONS
- To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)
- When the Self-Clean Cycle is Completed
- PRESS
- DISPLAY
- Ltn
- PRESS
- DISPLAY
- INSTRUCTIONS
- To adjust the oven temperature higher
- To adjust the oven temperature lower
- PRESS
- DISPLAY
- Using the Temperature Probe Feature
- General Care & Cleaning
- Generai Care & Cleaning
- Generai Care & Cleaning
- Changing the Oven Light
- Get it fil¿ÍÍ; home ili iiÉ!