Kenmore 88963 - Manual (Page 15)

RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below.
»To check the Setting for a given stage, touch MEMORY/RECALL once or more until the correct Stage
Light and Indicator Light turn on. The set Time, Temperature or Oven Temperature for that stage will
show in the display window.
e To check the Microwave Cooking Power level, touch MICRO POWER.
• To check the Oven Temperature, touch OVEN TEMP/PREHEAT.
® To check Probe Temperature, touch Miao Temp. Convec Temp and Micro/Convec Temp.
» To check TIME, touch Micro Time, Convec Time, and Micro/Convec Time.
To recall (check) a setting while the oven is operating, follow the directions below.
« To check settings while the oven is operating, touch the desired pad to recall the setting for the operating
stage.
B To recall a future stage, touch STOP, follow the directions above for nxalng (checking) a setting before
starting the oven, and then touch START to continue cooking.
»To recall TIME OF DAY while the oven is running, touch TIME OF DAY. It will show momentarily in the
display window.
» To recall Recipe number(s) while the oven is running, touch RECIPE #, and it will show momentarily in
' the display wnndow,
• To check the cooking power level during cooking, touch MICRO POWER.
Power level will show momentarily in the display window.
To Change a Setting
Recall the Setting to be changed by followñng directions above and make the change as follows:
TIME........... ........................................... .......... ............................................ Touch “0” until only one "O" shows in
(MICRO TIME, CONVEC TIME. MICRO/CONVEC TIME) the Display Window. Set Cooking
Time.
TEMPERATURE CONTROL ........................................................... Set Cooking Probe Temperature.
(MICRO TEMP. CONVEC TEMP. MICRO/CONVEC TEMP)
MICRO POWER. .......................... ................... .. .......... ........................ Set Microwave Cooking Power Level.
To reset to “HI”, set “W\
A
OVEN TEMP/PREHEAT....................... ........ ...................... .................. ... Set Oven Temperature.
PAUSE BETWEEN STAGES
Some recipes require separating, turning and adding or removing foods between stages. To set the oven
to stop between stages, touch PAUSE rather than MEMORY/RECAL.L when setting the oven. If pause is
set, the oven will automatically stop and the word “PAUS" will flash in the display window, To restart the
oven after the pause, touch START
15