Canister, Hood and cover, Caution – Kenmore 116.22813 User Manual
Page 7: Power-mate jr ® and caddy, To attach caddy, To insert power-mate jr, To remove power-mate jr, Hose
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CANISTER
1. Open the canister hood*
2. Check to see that the dust bag is proper
ly installed. See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter
is properly installed. See IVIOTOR SAFEP*'
FILTER CLEANING for instructions,
HOOD AND COVER
It is normal for the canister hood and cover
to come off when opened further than
needed. Line up the hinge slots, insert the
hood and cover hinges into the slots, and
close the hood and/or cover to reinstall.
A
CAUTION
ftnpn canisster hood with the
WI
m
I
w
I I wC*illw%17i
Wilrl* t,l
cover open. This will help to
prevent damage from occurring to
the canister hood and/or cover.
HOSE
1, Line up the hose
latch tab and notch
in canister hood
and insert hose into
canister until it
snaps in place.
To remove: Lift
hose latch tab
upward and pull up
on hose.
Handle
Handle
Button
Handle
Quick
Release
(Some
Models)
2. Insert
handle into
wand until
lock button
snaps in
place. Be
sure hose is
not twisted.
To remove;
Press handle
quick release
button and
pull up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not
stressed
fiSi
POWER-MATE JR ® AND CADDY
TO ATTACH CADDY
1. Align the tab
on the wand with
the slot in the
Power-Mate vJr,®
caddy.
2. Press the
caddy onto the
upper wand.
The caddy will
snap into place
TO INSERT POWER-MATE JR."
Lafcft
1, Place the front
of the Power
Mate Jr.® into the
caddy.
2. Rotate the
Power-Mate Jr.®
back until it
snaps into place.
TO REMOVE POWER-MATE JR,®
1, Press the latch and lift the Power-Mate
Jr.® out of the caddy.