Kenmore 116.22813 - Manual (Page 6)

ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
DO NOT plug Into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WAND-TELESCOPING
The wand length
is adjustable
and requires no
assembly. To
adjust, simply
push down on
the wand adjust
button and slide
the upper wand
to the desired
height.
Wan4
Length
Adjust
Sutton
-Keep
Hand
Above
This
Tab
The swivel, locat­
ed on the Power­
Mate®, allows you
to turn the handle
to the left side to
reach farther
under low furni­
ture.
When adjusting
the wand length
you may have to
hold the Power­
Mate® with your
hand or foot.
POWER-MATE®
Insert wand into Power-Mate® until the wand
button snaps into place.
Handle
Handle
Button
Handle
Quick
Release
Button -
Telescoping
Wand
Wand Length
Adjust Button
Wand
Button
Wand Quick
Release Pedal
(Some Models)