Performance features, Overload protector, Suction control – Kenmore 116.22813 User Manual
Page 12: Warning, Attachment use chart
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ATTACHMENT USE CHART
CLEANING AREA
ATTACHMENT
Furniture*
Between
Cushions* Drapes*
Stairs
Bare
Floors
Carpeted
Fioors/Rugs Walls
DUSTING BRUSH ^
X
X
X
CREVICE TOOL CCT:::::^
X
X
FABRIC BRUSH ^
X
X
FLOOR BRUSH
(Stsme Modeisj i«=s==*
X
X
Ak
Power»Mate®
X**
X
Handi-Mate Jr.®
(Some Modeis)'"
X
X
Power-Pate Jr.®
(Some Models)“*
X
X
“Always clean ailachments before ustog on fabrics- ** 3-way On/Off switch should be in FLOOR position
"* Handi-Male Jr,® and Power-Mate Jr..® attachment instructions are included with the products.
NOTE: When separating wands, depress lock button compleiety before pulling wands apart. If
wand lock button is difficult to depress, push the two wands more tightly together to line up
the lock button with the hole. Depress lock button and then pull wands apart.
PERFORMANCE FEATURES
EDGE CLEANER
Active brush edge
cleaners are on both
sides of the Power
Mate®,
Guide either
side of the
Power-Mate®
along base-boards or
next to furniture to
help remove dirt
trapped at carpet
edges.
Overload Protector
Reset Button
OVERLOAD PROTECTOR
The
Powar-Mate®
has
built-in protection
against motor and belt
damage should the
agitator jam. If the
agitator slows down or
stops, the overload
protector shuts off the
Power-Mate*.
The
canister motor will continue to run.
To correct problem: Turn off vacuum,
remove obstruction, then press reset button
To reset: Push in the overload protector
button.
SUCTION CONTROL
The suction
control allows
you to change
the vacuum
suction for
different fabric
and carpet
weights. Opening the control decreases
suction for draperies and lightweight rugs,
while closing the control increases suction
for upholsteries and carpets.
decrease
Suction
Imrease
Suction
WARNING
Personal Injury Hazard
Always unplug the vacuum cleaner
before cleaning the agitator area as
brush may suddenly restart. Failure
to do so can result in personal
injury.
12