Agitator servicing, Warning, To check agitator assembly – Kenmore 116.22813 User Manual

Page 19: To replace agitator assembly, Agitator assembly, Agitator servicing agitator assembly

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AGITATOR SERVICING

WARNING

Electrical Shock Or Personal Injury
Hazard

Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec
trical shock or personal injury from
cleaner suddenly starling.

TO CHECK AGITATOR
ASSEMBLY

When brushes
are worn to the

level of the base

support bars,

replace the
agitator
assembly.

TO REPLACE AGITATOR

ASSEMBLY

IWI LJr b» 1

1. Remove Power-Mate® cover, agitator
cover, belt and agitator assembly. See
To Remove Beif in BELT CHANGING
AND AGITATOR CLEANING.

2. Remove end caps, washers, screws,
end brush, and brush sprocket pieces
from ends of old agitator assembly

3. Reassemble agitator assembly. To line
up screw holes in dowel, sprocket and
end brush, be sure ail of the brush

sprocket pieces align properly. See
AGITATOR ASSEMBLY.

4. Reinstall bell, agitator assembly,
agitator cover and Power-Mate® cover.
See To Replace Beit" in BELT
CHANGING AND AGITATOR CLEANING.

.r.

•¡ir

AGITATOR ASSEMBLY

End

Brush

End

This manual is related to the following products:

116.22812