Install side burner frame to firebox – Kenmore 119.16312800 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Towel Bar Handles, Utensil Hooks, Side Panels
□ Use 2 Phillips Head Bolts (M4X8mm), 2 Lock Washers (M4), and 2 Washers (M4) to attach a Towel
Bar to the side burner frame. Use 3 Phillips Head Bolts (M4X8mm) and 3 Lock Washers
(M4) to attach the Side Burner Control Panel to the side burner frame. See Insets 1 and
2
.
Slide 3 Utensil Hooks into the second Towel Bar and use 2 Phillips Head Bolts (M4X8mm), and 2
Lock Washers (M4), and 2 Washers (M4) to attach the Towel Bar to the side shelf. Use 3 Phillips
Head Bolts (M4x8mm) and 3 Lock Washers (M4) to attach the Side Shelf Front Panel to the side
shelf frame. See Insets 3, 4 and 5.
□
Install Side Burner Frame to Firebox
□
Unscrew the 2 Phillips Head bolts V
4
" from the upper left and right corner holes In the left side of the
firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side
burner frame.
□
SI ide the upper holes of the side burner frame over the heads of the 2 Phillips Head Bolts and drop
down.
□
Use 2 Phillips Head Bolts (M
6
xl
6
mm) and 2 Washers (M
6
) to attach the lower holes in the side
burner frame to the firebox as shown in Inset 2. Tighten the upper bolts after the 2 lower bolts are
tight.
Phillips Head Bolt M
6
xl
6
mm
Qty; 2
Lock Washer M
6
Qty: 2