Attach firebox to cabinet, Install grease cup bracket and grease cup – Kenmore 119.16312800 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attach Firebox to Cabinet
□
Place the firebox onto the cabinet frame with regulator hose and side burner ignition wire
hanging Inside of the cabinet. We recommend using 2 people to lift the firebox.
□
Line up the holes and attach the firebox to the cabinet frame using 4 Phillips Head Bolts (M
6
xl
6
mm)
and 4 Washers (MSxl.OT).
Hint: You may need to slide the Firebox Assembly forward, backward, or lift slightly for
the bolt holes to properly line up.
|llll
Phillips Head Bolt MSxlSmm
Qty: 4
Plastic Washer MSxl.OT
Qty: 4
Install Grease Cup Bracket and Grease Cup
□
Attach the Grease Cup Bracket to the bottom of the Grease Tray using 2 Cotter Pins as shown.
The Cotter Pins in the bracket are towards the front of the grill. See Insets 1 and 2.
□
Install the Grease Cup into the Grease Cup Bracket, inserting it from the front of the cabinet.
See Inset 3.
Cotter Pin
Qty:
2
13